The MTS 210—a multi-process machine capable of MIG, synergic MIG, DC TIG, and Stick— offers a manual mode as well as 9 synergic programs. A quick and simple, 3-step process makes setup of the MTS 210 a breeze and gets you welding in minutes—just select your process, wire diameter, and material thickness during automated setup. The 8 square inch LCD featured on the MTS 210 adds to setup simplicity by telling you which gas your application requires and also enables you to easily view and adjust your weld parameters.
The MTS 210 also offers an ST-arc function. The ST-arc function reads welding parameters back to the welding machine live (while welding). The function monitors the arc length and keeps the arc length constant, while allowing the stick-out (CTWD; contact tip to work distance) to vary. ST-arc, essentially, allows the new welder to focus on the location of the weld, as well as the travel speed, and also allows the experienced welder to keep a perfectly uniform weld bead along with uniform heat input, which enables the welder to achieve good welds in tight corners—a feat that couldn't be reached previously with conventional welding equipment.
The MTS 210 operates the same way as the Pro Pulse™ 220 MTS. The only difference between the two machines is the logic board; the logic board in the MTS 210 does not include the pulse module so the machine, therefore, does not include any pulsed process MIG welding programs. However, you may upgrade the front panel logic board, if you choose to do so at a later date, to add the pulse feature and pulsed process MIG welding programs to your machine. The cost to upgrade the front panel logic board is $775.00. Please give us a call at (847) 357-0700 if you previously purchased the MTS 210 from us and are now interested in the upgrade.
The standard MTS 210 package includes the following items:
♦ MTS 210 Power Source
♦ 10' 15 Series (180A) or 24 Series (240A) MIG Gun for Welding Steel*
♦ 10' Ground Clamp
♦ 6' Gas Hose
♦ .030"/.035" Drive Roll*
*Upgrade options available, via drop down boxes above, for additional charges.
Please note: We test all 26 Series MIG guns for welding aluminum prior to shipment so you may notice slight signs of wear or use.
|Input Voltage||230V (208 to 240V)|
|Input Amperage||MIG: 35A
TIG & Stick: 40A
|Maximum Output Amperage||200A|
|Minimum Output Amperage||MIG: 12A
TIG & Stick: 4A
|Maximum Recommended Thickness
*Single pass capacity varies depending on the material being welded and the settings of the machine.
|1/4" to 3/8"|
|Duty-Cycle||35% @ 200A (77º F)
100% @ 140A (77º F)
25% @ 200A (104º F)
60% @ 140A (104º F)
100% @ 120A (104º F)
|Arc Voltage||13 to 35V|
|Open Circuit Voltage||75V|
|Electronic Overload Protection||Yes|
|Cooling (On-demand, electric fan, variable speed)||Fan (Forced Air)|
|Wire Spool Capability
*Up to a 44 Lb. weight capacity.
|8" and 12"|
*Depends on the material being welded (not all wire can be welded in all sizes).
|.023" to .045"|
|Wire Feed Rate (In./Min.)||55 to 630 IPM|
|Dimensions (Length x Width x Height)||19-3/4" x 10" x 14-1/2"|
*Without wire and cables.
CA Prop 65 - For Residents of California
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.