When stick welding, in either the ARC welding mode or the CEL welding mode, the Inverarc offers a few adjustable functions—arc force, hot start, and pulse frequency. In the ARC welding mode, you can vary the arc force value from 0% to 200%, and in the CEL welding mode, you can vary the arc force from 0% to 500%. In both the ARC welding mode and the CEL welding mode, you can vary the hot start value from 3% to 40% and the pulse frequency value from 0.4 Hz to 5 Hz.
Only a few engine driven welders match the incredible arc dynamic of the Inverarc 200 TLP.
The Inverarc also functions as a lift-start, DC TIG with pulse ability. To run the Inverarc in the TIG welding mode, you only need a TIG torch (with a gas valve in the handle), a flowmeter, and a gas bottle. Connecting a remote control, such as a foot pedal or a hand control, enables you to easily and remotely adjust the output amperage. However, you can still adjust the output amperage without a remote control—simply use the encoder on the Inverarc to adjust the output amperage as necessary.
In the TIG welding mode, the Inverarc offers two adjustable functions—slope down and pulse frequency. You can vary the slope down time from 0.1 seconds to 10 seconds, or you can turn slope down off, and you can vary the pulse frequency value from 0.4 Hz to 999 Hz.
When you purchase an Inverarc 200 TLP, the package includes the power source, the electrode holder and cable assembly, the ground clamp and cable assembly, and a travel bag. The Inverarc operates on single-phase, 230 volt power (208-240 volt), and comes set up with a NEMA 6-50P plug. Packed with power and backed by a 3-year warranty, the Inverarc is perfect for a multitude of welding applications in virtually any location, thanks to the light-weight and small size of the power source, along with the convenient travel bag.
|Input Voltage||230v (208 to 240v), Single-Phase, 50/60 Hz|
|Input Amperage||43A @ 200 amps SMAW|
|Output Amperage||4 to 200A|
|Duty-Cycle||20% @ 200 amps
100% @ 125 amps
|No Load Voltage||100v|
|No Load Voltage w/VRD On||Less than 25v|
|Arc Voltage (Stick)||20.2 to 28v|
|Arc Voltage (TIG)||10.2 to 18v|
|Arc Force (Stick Only)||ARC Welding Mode: 0 to 200%
CEL Welding Mode: 0 to 500%
|Hot Start (Stick Only)||3 to 40%|
|Pulse Frequency (Stick)||0.4 to 5 Hz|
|Pulse Frequency (TIG)||0.4 to 999 Hz|
|Slope Down (TIG Only)||.1 to 10 Sec|
|Dimensions||13-5/8" L x 5-1/2" W x 11" H|
CA Prop 65 - For Residents of California
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Have run a decent amount of 3/32 and 1/8 rod with this unit. I like the full size dinse connectors and range of adjustments (arc force, hot start, and pulse). Nice that it saves settings between CEL and ARC mode, so switching between 60xx and 7018 is very quick. The encoder knob doesn't miss a count(!) when turned quickly, small detail but appreciated. Wish the mains cable was more flexible and the handle was nicer, just small stuff. I use this for light fabrication and repair, I suppose what it's meant for.
I bought this unit because of all the parameters you can adjust for stick welding and specifically because it includes pulse. Done many jobs with it and it works great and is portable. The other machine is 145 lb transformer machine I use for AC welding.