If you want us to add you to our waitlist, to ensure that you receive a water-cooled Invertig ™ 313 when we receive new inventory, please contact our office at (847) 357-0700 or send us an email at firstname.lastname@example.org.
The all new HTP America® Invertig 313 AC/DC runs on single-phase or 3-phase power from 208V to 240V and offers an outstanding duty-cycle for production applications using 3-phase power! With the Invertig 313 AC/DC, you can run the following processes: TIG (GTAW), Pulsed TIG (GTAW-P), Stick (SMAW), and Pulsed Stick (SMAW-P). The Invertig 313 features the same large LCD as the Pro Pulse™ 300 and the Invertig 400 AC/DC and also features an updated and intuitive software system, which makes parameter selection and setup a breeze.
The complete Invertig 313 AC/DC water-cooled package available for purchase from our online store includes:
♦ Invertig 313 AC/DC Power Source
♦ Welding Cart
♦ Arctic Chill Water Cooler
♦ CK230 Series Water-Cooled TIG Torch*
♦ Foot Pedal*
♦ Gas Hose
♦ 2 Gallons of Coolant
♦ Ground Cable and Clamp Assembly*
*Upgrade options available, via drop down boxes above, for additional charges.
IMPORTANT INFORMATION REGARDING TRUCK FREIGHT SHIPMENTS
The Invertig 313 SHIPS FREE to any business/commercial address with access to a forklift in the Contiguous United States (i.e., the lower 48). If you choose to ship the machine to your residence, accessorial fees will apply (a residential delivery fee, a lift-gate service fee, and possibly a limited access fee). Accessorial fees vary by ship to location and by freight carrier. You may place your order online, but you will be contacted by Customer Service to arrange and pay for any applicable accessorial fees. To avoid accessorial fees, we can also ship the machine to your nearest freight terminal, where the carrier will hold your machine for you to pick-up.
Also, if your ship to address is in Alaska, Guam, Hawaii, Puerto Rico, or any other U.S. Territory outside of the Contiguous United States, partial shipping charges will apply and accessorial fees may apply. You may still place your order online, but you will be contacted by Customer Service to arrange and pay for partial shipping along with any applicable accessorial fees.
IMPORTANT INFORMATION REGARDING TRUCK FREIGHT SHIPMENTS AND LOST OR DAMAGED GOODS
KEEP ALL SHIPPING CARTONS AND PACKAGING MATERIALS!
Your truck freight shipment leaves our facility and is accepted by the freight carrier in good condition. The material becomes your property when signed for by the freight carrier. Our responsibility for the shipment ceases when signed for and removed from our facility by the freight carrier.
Inspect your shipment thoroughly as soon as received. If possible, unpack the shipment in the presence of the driver. If this is a "HOLD ON DOCK FOR PICK-UP" shipment, inspect the shipment prior to leaving the freight terminal. If you do not inspect the shipment for loss or damage prior to signing for and leaving the freight terminal with the shipment, then the freight carrier will claim that you damaged the shipment bringing it home. If you notice loss or damage, then you must note this on the freight bill.
We are willing to assist you in every possible manner in the collections of claims for loss or damage, but this willingness does not make us responsible for such collection of claims or replacement of materials.
|Input Voltage||230V (208 to 240V) Single- or 3-Phase|
|Welding Current Single-Phase||4 to 300A|
|Welding Current 3-Phase||4 to 300A|
|Single-Phase Rated Output||40% @ 300A|
|230V Single-Phase Input Amps @ Rated Load||44A|
|3-Phase Rated Output||80% @ 300A|
|3-Phase Input Amps @ Rated Load||32A|
|AC Frequency (Hz)||20 to 400 (Up to 100A)
20 to 200 (Over 100A)
|AC Balance (%)||10 to 90|
|Pre-Flow (Seconds)||0.1 to 5.0|
|Post-Flow (Seconds)||0.1 to 99.9|
|Initial Amps (%)||10 to 90|
|Final Amps (%)||10 to 90|
|Slope Up (Seconds)||0.1 to 10.0|
|Slope Down (Seconds)||0.1 to 10.0|
|Spot Time (Seconds)||0.1 to 10.0|
|Hot Start (%)||0 to 50|
|Arc Force (%)||0 to 500|
|Wave Forms||Soft Square
|EN Amperage (%)||10 to 99|
|EP Amperage (%)||10 to 99|
|Duty-Cycle (Single-Phase TIG)||40% @ 300A
60% @ 250A
100% @ 200A
|Duty-Cycle (3-Phase TIG)||80% @ 300A
100% @ 280A
|Duty-Cycle (Single-Phase Stick)||35% @ 260A
60% @ 200A
100% @ 180A
|Duty-Cycle (3-Phase Stick)||35% @ 300A
60% @ 240A
100% @ 200A
|Dimensions (Length x Width x Height)||26-1/2" x 12-1/4" x 17-1/2"|
Pulses/Second (PPS) Stick AC & DC
Pulses/Second (PPS) TIG AC
Pulses/Second (PPS) TIG DC
Peak Time (%)
Background Amps (%)
0.4 to 5.0
0.4 to 10.0
0.4 to 999.9
10 to 90
10 to 90
CA Prop 65 - For Residents of California
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.