Description:
1.5" - 2" Tapered Purge Plug Kit
Fitment:
1.6" to 2.0" Tubing
1.25" NPS Sch 5
1.5" NPS Sch 5
1.5" NPS Sch 10
1.5" NPS Sch 40
(This kit does not fit 1.5" tubing. For 1.5" tubing, see P/N PP10-15PQD for our next size down)
One of our customers, Strictly Modified, who uses the HTP Invertig 221 to build performance parts, designed our Purge Plug Kits. Our Purge Plug Kits have been in development for months, in order to determine the best sizing per plug, along with the best taper angle for bite and ease of installation and removal. For easier removal, we machined flats on the top of each plug so you can quickly remove them with the twist of a wrench. With one of our Purge Plug Kits, you will no longer waste Argon or have to mess around with tin foil.
Our purge plugs work excellent anywhere back purging is needed and are great for sanitary welding. You can use our purge plugs for manifold fabrication, collectors, dump tubes, and even wastegate flanges. Keep the tin foil in the kitchen where it belongs, save set up time and money in wasted Argon, and maximize your productivity. Simply tap them in and you are good to go!
Kit includes:
(2) 1.5" to 2.0" machined aluminum tapered purge plugs
(1) 1/8" male to 9mm female quick connect
(1) 9mm male quick connect with 3/16" barb
(1) 1/8" NPT male vent fitting
(2) Hose clamps
(1) NP-72 standard "B" Argon fitting
(1) 5/8"-18 male nut
(1) 6' gas hoseFitment:
1.6" to 2.0" Tubing
1.25" NPS Sch 5
1.5" NPS Sch 5
1.5" NPS Sch 10
1.5" NPS Sch 40
(This kit does not fit 1.5" tubing. For 1.5" tubing, see part# PP10-15PQD for our next size down)
One of our customers, Strictly Modified, who uses the HTP Invertig 221 to build performance parts, designed our Purge Plug Kits. Our Purge Plug Kits have been in development for months, in order to determine the best sizing per plug, along with the best taper angle for bite and ease of installation and removal. For easier removal, we machined flats on the top of each plug so you can quickly remove them with the twist of a wrench. With one of our Purge Plug Kits, you will no longer waste Argon or have to mess around with tin foil.
Our purge plugs work excellent anywhere back purging is needed and are great for sanitary welding. You can use our purge plugs for manifold fabrication, collectors, dump tubes, and even wastegate flanges. Keep the tin foil in the kitchen where it belongs, save set up time and money in wasted Argon, and maximize your productivity. Simply tap them in and you are good to go!
Kit includes:
(2) 1.5" to 2.0" machined aluminum tapered purge plugs
(1) 1/8" male to 9mm female quick connect
(1) 9mm male quick connect with 3/16" barb
(1) 1/8" NPT male vent fitting
(2) Hose clamps
(1) NP-72 standard "B" Argon fitting
(1) 5/8"-18 male nut
(1) 6' gas hose
Fitment:
1.6" to 2.0" Tubing
1.25" NPS Sch 5
1.5" NPS Sch 5
1.5" NPS Sch 10
1.5" NPS Sch 40
(This kit does not fit 1.5" tubing. For 1.5" tubing, see P/N PP10-15PQD for our next size down)
One of our customers, Strictly Modified, who uses the HTP Invertig 221 to build performance parts, designed our Purge Plug Kits. Our Purge Plug Kits have been in development for months, in order to determine the best sizing per plug, along with the best taper angle for bite and ease of installation and removal. For easier removal, we machined flats on the top of each plug so you can quickly remove them with the twist of a wrench. With one of our Purge Plug Kits, you will no longer waste Argon or have to mess around with tin foil.
Our purge plugs work excellent anywhere back purging is needed and are great for sanitary welding. You can use our purge plugs for manifold fabrication, collectors, dump tubes, and even wastegate flanges. Keep the tin foil in the kitchen where it belongs, save set up time and money in wasted Argon, and maximize your productivity. Simply tap them in and you are good to go!
Kit includes:
(2) 1.5" to 2.0" machined aluminum tapered purge plugs
(1) 1/8" male to 9mm female quick connect
(1) 9mm male quick connect with 3/16" barb
(1) 1/8" NPT male vent fitting
(2) Hose clamps
(1) NP-72 standard "B" Argon fitting
(1) 5/8"-18 male nut
(1) 6' gas hose
1.6" to 2.0" Tubing
1.25" NPS Sch 5
1.5" NPS Sch 5
1.5" NPS Sch 10
1.5" NPS Sch 40
(This kit does not fit 1.5" tubing. For 1.5" tubing, see part# PP10-15PQD for our next size down)
One of our customers, Strictly Modified, who uses the HTP Invertig 221 to build performance parts, designed our Purge Plug Kits. Our Purge Plug Kits have been in development for months, in order to determine the best sizing per plug, along with the best taper angle for bite and ease of installation and removal. For easier removal, we machined flats on the top of each plug so you can quickly remove them with the twist of a wrench. With one of our Purge Plug Kits, you will no longer waste Argon or have to mess around with tin foil.
Our purge plugs work excellent anywhere back purging is needed and are great for sanitary welding. You can use our purge plugs for manifold fabrication, collectors, dump tubes, and even wastegate flanges. Keep the tin foil in the kitchen where it belongs, save set up time and money in wasted Argon, and maximize your productivity. Simply tap them in and you are good to go!
Kit includes:
(2) 1.5" to 2.0" machined aluminum tapered purge plugs
(1) 1/8" male to 9mm female quick connect
(1) 9mm male quick connect with 3/16" barb
(1) 1/8" NPT male vent fitting
(2) Hose clamps
(1) NP-72 standard "B" Argon fitting
(1) 5/8"-18 male nut
CA Prop 65 - For Residents of California
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm.
For more information, please visit www.P65Warnings.ca.gov.