15 Series (180A) MIG welding gun with Euro Kwik connect/disconnect back end. The installed liner, with an I.D. of 1.6mm, runs .023" to .045" wire. The gun uses HTP America® 15 Series consumables. To remove the gas nozzle, twist clockwise and pull. To install the gas nozzle, twist clockwise and push. Rigid and flex neck guns available in 10', 12', and 15' lengths.
Please Note: Do not bend the flex neck into a complete U-shape—the neck can crack.
CA Prop 65 - For Residents of California
Warning: Welding and cutting equipment, accessories, and fumes can expose you to chemicals, including Chromium (Hexavalent Compounds), Lead, and Nickel, which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
Love This Gun!
I've found this gun to be exactly what I've needed to complete my welder. The OEM gun was just too short to be very useful to me and this is so much better. I have to work in large tanks in the field sometimes and this gun keeps me from having to constantly reposition the welder. Consumables are easy and inexpensive to find (Harbor Freight).
Mig welder lead
Perfect fit works great
15 Series (180A) Mig gun (15’)
This gun is awesome! Plenty of length to maneuver the shop. Flex head is a bonus. Things to remember: because of the length keep the cable as straight as possible or at least in big sweeps, especially with smaller (.023) wire to prevent drive roll slipping and burn backs. Using good wire also helps.
Can’t beat the price for this level of quality. Has made my MIG set up much more versatile.
15 Series (180A) MIG Welding Gun
These work great - I've replaced the gun on my Hobart 210 and my Forney 140 both with this type of gun and they work great now. The flex neck is really handy - you can set the tip at whatever angle you need to weld at.